Articles delegate-en/151-190 of [1-5169] on the server localhost:119
  upper oldest olders older1 this newer1 newers latest
search
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
range 151 - 190   digest:
LDAP: how ?
  12/04-09:52 . 0151  ysato@etl.go.jp (Yutaka Sato 佐藤豊) [35]
  Since LDAP is transmitted on a single TCP connection ended at the server side port number 389, simple tcprelay by DeleGate like follows will do. # delegated -P389 SERVER=tcprelay://ldap-server:389 R
Basic question ??
  12/04-10:48 . 0152  ysato@etl.go.jp (Yutaka Sato 佐藤豊) [25]
  Any caching more or less is similar with others, but none of them is the same with another :-p. Your question is difficult to answer without knowing your purpose why you want to know about it. Cachi
Porblems with Netscape Communicator 4.5 and ICQ
  12/04-10:59 . 0153  ysato@etl.go.jp (Yutaka Sato 佐藤豊) [24]
  Which version of DeleGate are you using, on which platform? I know version 5.7.0 to 5.7.4 does not work for NC4.5 if compiled with gcc on Solaris2.X. If it is your case, try version 5.7.5 (released
Some problems ....
  12/04-11:19 . 0154  ysato@etl.go.jp (Yutaka Sato 佐藤豊) [22]
  Create ${Actdir} so that your DeleGate server can access it with read/write permission. Specify a PERMIT or a RELIABLE parameter so that your client is not forbidden to access. Read the error messag
Some problems .... Thanx!
  12/04-14:51 . 0155  "Anthony K.L." <psyaabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [14]
  Ok! Thanx! It worked!
Start up questions
  12/05-07:11 . 0156  "Jaapar, Jazzery" <ptqaabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [11]
  I'm running freebsd-3.0 as a firewall, and am planning to use delegate as proxy. What do I need to start? I know there's a port for delegate and I have compiled that successfully However, how do I s
  12/05-10:57 . 0157  ysato@etl.go.jp (Yutaka Sato 佐藤豊) [25]
  Did you read "tutor-en.htm"? It's a very short tutorial for beginners enclosed in (at least in the original) the distribution of DeleGate. It is also available at http://www.delegate.org/delegate/tu
user authentication
  12/05-16:44 . 0158  ysato@etl.go.jp (Yutaka Sato 佐藤豊) [19]
  It is not possible by principle because the HTTP is a protocol which is formed as a pair of two messages, a request message from a client then a response message from a server. I think I might be ab
setting up pop proxy
  12/05-17:29 . 0159  ysato@etl.go.jp (Yutaka Sato 佐藤豊) [34]
  I tried POP-DeleGate with Netscape Mail to find out the client does not send out "user@host" as is given in User Name, but it send only the "user" part out. In such case, you should try to specify y
Problem with large messages.
  12/05-19:35 . 0160  Marco Morcos <puaaabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [8]
  Dear sir, I am using Delegate version 5.8.1 on my Red Hat Linux server. I have a problem with the POP server in that large E-mail messages (about 1.8 Mega bytes) dont get popped. Any suggestions ??
  12/05-21:38 . 0161  ysato@etl.go.jp (Yutaka Sato 佐藤豊) [16]
  A parameter "MIMECONV=thru" might let your large message "popped"(?) in the situation where line between the server and the DeleGate is slow. (http://wall.etl.go.jp/mail-lists/delegate/7684) Cheers,
Error message: "cannot create ${ACTDIR}/PID/${PORT} "
  12/06-22:39 . 0162  Marco Morcos <puaaabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [16]
  Dear sir, I know that you have answered that question before, however I don't know where to create the ${ACTDIR} directory (I mean under which subdirectory). I am using Red Hat Linux and delegate v.
  12/07-00:57 . 0163  ysato@etl.go.jp (Yutaka Sato 佐藤豊) [29]
  On Unix, the default location of ACTDIR is /tmp/delegate which will be created automatically by DeleGate if /tmp directory is writable. [Manual.txt] I don't know so much about what will happen witho
Problem with RealPlayer
  12/09-08:56 . 0164  John Smith <puqaabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [10]
  Hello Yutaka, I have problems with configuring RealPlayer with Delegate, cause it needs PNA and RTSP proxies. Is it possible to make them with Delegate, I'm using delegate 5.7.2. Thanks, John
Socks
  12/11-07:37 . 0165  "Jaapar, Jazzery" <ptqaabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [7]
  I couldn't figure out how to use delegated as a Socks Server. Can anyone help me? jjaapar@raymondkarsan..
  12/11-10:19 . 0166  ysato@etl.go.jp (Yutaka Sato 佐藤豊) [19]
  on 12/11/98(07:36:18) Figure out, please, what you need to do is specifying the port number on which clients are accepted, and the service name (protocol name) to be achieved for clients. Thus the m
Multiple HTTP ports with delegate
  12/13-18:27 . 0167  Marco Morcos <puaaabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [13]
  Dear sir, My ISP provides two separate http services. 1- The first one is on his proxy.myISP.com:2080 port and I connect successfully to that by: delegated -P2080 SERVER=http 2- The second uses sate
DeleGate 5.8.x as CGI broken
  12/16-14:23 . 0168  Scott Dybiec <pvaaabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [9]
  I tried to use DeleGate 5.8.x as a CGI, but it crashes. 5.7 seems to work so I'm using it at: http://www.humanfactor.com/cgi-bin/cgi-delegate/apache-ML/nh/ $cott
  12/16-15:13 . 0169  ysato@etl.go.jp (Yutaka Sato 佐藤豊) [40]
  Hi $cott, This functionality to make DeleGate work as a CGI program with "-Fcgi" option seems to has been lost since 5.8.0 on which I totally changed and unified codes for -Fxxx options. I'm not sur
unable to read the certificates generated with SSleay
  12/17-13:27 . 0170  "Horia Georgescu" <pbyaabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [175]
  Hi, Please let me know what I'm doing wrong here... This is what I'm using to startup delegate: SSL_SERVER_CERT_FILE=cacert.pem SSL_SERVER_KEY_FILE= cakey.pem export SSL_SERVER_KEY_FILE export SSL_S
  12/17-13:59 . 0171  ysato@etl.go.jp (Yutaka Sato 佐藤豊) [35]
  on 12/17/98(13:29:15) It seems that "cakey.pem" is executed as a command by your shell since you inserted a unnecessary SPACE character ^ here. Cheers, Yutaka Yutaka Sato <ysato@etl.go.jp> http://ww
Strange problems? :?
  12/17-16:00 . 0172  Official <psyaabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [49]
  Hello , Sorry, if my questions is very dummy: I'm use DG 5.8.0 at Linux Red Hat 5.0 1) I have my official mailbox at my server and also i have a some free mailboxes at .geocities.com, .softhome.net
  12/17-16:31 . 0173  ysato@etl.go.jp (Yutaka Sato 佐藤豊) [52]
  Have you ever read any document about DeleGate? I recommend you to make at least a glance at followings: 1) http://www.delegate.org/delegate/tutorial/ 2) ftp://ftp.delegate.org/pub/DeleGate/Manual.t
unable to read the certificates generated with SSleay
  12/17-23:42 . 0174  "Horia Georgescu" <pbyaabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [49]
  You're much obliging, Sir. Very prompt answer. Thanks much and Happy Holidays! Horia Georgescu ---Original Message--- From: Yutaka Sato _$@:4F#K-_(J) [mailto:ysato@etl.go.jp] Sent: Thursday, Decembe
About DeleGate
  12/18-01:05 . 0175  Lucas Adrin Gmez Blandn <pv4aabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [23]
  Hi, my name is Lucas G=F3mez, I work at Medell=EDn's university in = computational area. I'm install your DeleGate (a great program) in a FreeBSD 2.2.7 (I'm = waiting 2.2.8 by upgrade!). My organiza
delegated is asking for PEM phrase ?!
  12/18-01:44 . 0176  "Horia Georgescu" <pbyaabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [85]
  Hi, I'm really sorry that I'm not able to get the things going ... After correcting the previous problem, everything comes up now. However whenever I'm trying to connect to https://dproxy, here is w
About DeleGate
  12/18-01:53 . 0177  ysato@etl.go.jp (Yutaka Sato 佐藤豊) [35]
  You can redirect accesses to URLs of a speficifed pattern to another specified URL, which may just return a denial message. Prepair your denial mesage, for example, at /path/of/denial.html. And if y
delegated is asking for PEM phrase ?!
  12/18-02:18 . 0178  ysato@etl.go.jp (Yutaka Sato 佐藤豊) [21]
  I think the problem is not a matter of DeleGate, because DeleGate have nothing to do with SSL indeed. DeleGate just call "sslway" as a filter program, and it does not know what it does. I suppose yo
  12/18-02:25 . 0179  ysato@etl.go.jp (Yutaka Sato 佐藤豊) [32]
  I missed the very message in your log, which says "cakey.pem" you specified is not there ... Cheers, Yutaka Yutaka Sato <ysato@etl.go.jp> http://www.etl.go.jp/~ysato/ @ @ Computer Science Division,
About delegate!
  12/18-03:29 . 0180  Lucas Adrin Gmez Blandn <pv4aabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [23]
  You can redirect accesses to URLs of a speficifed pattern to another = specified URL, which may just return a denial message. Prepair your = denial mesage, for example, at /path/of/denial.html. And
authentication not working for SSL client accessing Delegate SSL proxy?
  12/18-15:10 . 0181  "Horia Georgescu" <pbyaabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [14]
  Hi, I'm trying to get this going on my own, but it doesn't work ... Here is an excerpt from "A universal SSL proxy by DeleGate": "... If you wish to see client's certificate in SSLway with "-ac" opt
  12/18-15:55 . 0182  ysato@etl.go.jp (Yutaka Sato 佐藤豊) [45]
  on 12/18/98(15:11:52) Have you cleared the problem of "keyfile not found or wrong" ? I should have noticed that SSL_xxx_yyy_FILEs must be specified in absolute path when you run DeleGate in backgrou
CuSeeme Proxy and Delegate Configuration
  12/25-11:46 . 0183  James Buckeyne <pw4aabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [24]
  Can someone help me configure Delegate as a CU-Seeme Proxy for a Windows 95 machine with a single Net card, with 2 addresses (192.x.x.1, 192.x.x.2) where CU-Seeme program will use .2 and the proxy o
Large E-mail messages.
  12/26-16:10 . 0184  Marco Morcos <puaaabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [13]
  - I also still have a problem with 2.5 Megabytes mail or larger although I pass MIMECONV = thru as a command line parameter. I have also tried replacing my mime.c file with the file in mimekit and I
Redirecting http requests to another proxy server
  12/26-16:10 . 0185  Marco Morcos <puaaabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [10]
  Dear sir, - How do I redirect http requests from my DeleGate proxy server clients to my ISP's proxy server port 80, knowing that this server will request a user name and a password. (Can I pass them
I would like to subscribe to your mail-list
  12/29-11:06 . 0186  Alexey & Tatyana Godin <pxiaabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [2]
 
  12/30-00:50 . 0187  =?iso-8859-2?Q?J=E1n=20Mr=E1zik?= <pxmaabdyi-xgv6ctp3zalr.ml@ml.delegate.org> [77]
 
Re:
  12/30-02:42 . 0188  ysato@etl.go.jp (Yutaka Sato 佐藤豊) [27]
  On 12/30/98(00:50) you =?iso-8859-2?Q?J=E1n=20Mr=E1zik?= <pxmaabdyi-xgv6ctp3zalr.ml@ml.delegate.org> wrote in <_A187@delegate-en.ML_> The minimum configuration of DeleGate as a POP-proxy is like thi
Some questions
  12/30-17:12 . 0189  pxuaabdyi-xgv6ctp3zalr.ml@ml.delegate.org [27]
  Hello, I've discovered DeleGate two days ago, and I've got some question I couldn't find answers for: - Is there something special to do if I don't need/want to cache accesses, besides not creating
  12/30-18:31 . 0190  ysato@etl.go.jp (Yutaka Sato 佐藤豊) [62]
  You can explicitly disable any caching by "CACHE=no". No difference practically as long as you use it as a HTTP proxy. I understand that these make different response of top page when the HTTP-DeleG
  admin search upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
Generated:12/10 21:10:23 (1 sec) Expires:12/11 03:10:22 @_@V