Articles delegate-en/260-270 of [1-4014] on the server localhost:7119
  upper oldest olders older1 this newer1 newers latest
search
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
range 260 - 270   digest:
Configuration of ICQ UDP-relay ?
  02/06-06:49 . 0260  Lars Holmstrm <paqaqbdyi.ml@delegate.org> [79]
___ I have tried to setup a ICQ UDP relay together with my WEB-proxy, NNTP-server etc, but with low successrate. Unfortunely I have no experience in ICQ and have no software to run it either. What I am
  02/06-20:47 . 0261  Marco Morcos <puaaabdyi.ml@delegate.org> [105]
___ Hello Lars, The only problem is that the syntax is incorrect. To run the UDP relay in your delegate directory you should write: /var/spool/delegate/delegated -P4000 SERVER=udprelay://icq.mirabilis.c
  02/07-17:30 . 0262  Lars Holmstrm <paqaqbdyi.ml@delegate.org> [112]
___ Dear Marco, Thanks for your answer and help. I do see the problem I had with SOCKS. This is corrected now. But Why do you specify both "-P4000" and the portnumber ":4000" for the target ? Will than
Number of delegate instances ?
  02/07-17:32 . 0263  Lars Holmstrm <paqaqbdyi.ml@delegate.org> [8]
___ As I understand you have to run a separate instance of delegate for every server, SOCKS, SMTP, NNTP, HTTP, UDP-RELAY etc. What is a common configuration people are using ? 5 duplicates ? In my case
SMTP & POP3 relay ?
  02/07-18:37 . 0264  Lars Holmstrm <paqaqbdyi.ml@delegate.org> [8]
___ Is it possible to relaying SMTP and POP3 to hosts outside the firewall (delegate). What I am trying to achieve is a way so that users on my local LAN using non-official adresses can specifying their
Configuration of ICQ UDP-relay ?
  02/07-19:33 . 0265  Marco Morcos <puaaabdyi.ml@delegate.org> [45]
___ Dear Lars, I will attempt to set up UDP Relay (for ICQ) step by step. 1- Open a server port to accept requests from ICQ clients I have this as port 4000 but you can give it a different number. And m
Problem with Delegated and Telnet with INTR char
  02/09-06:36 . 0266  Ben Kressman <paiaqbdyi.ml@delegate.org> [18]
___ Hello. I'm using delegated to do SSL Telnet and masqing to an internal host. I notice that when I am logged-in in this manner, that if i send an interupt character (normally set to CONTROL-C on most
Configuration of ICQ UDP-relay ?
  02/09-07:25 . 0267  Lars Holmstrm <paqaqbdyi.ml@delegate.org> [42]
___ Thanks. Now I was able to connect (after I installed ICQ). Everything worked as expected, but after I disconnected I am unable to connect again. ICQ reports "Can't establish connection ..." The foll
  02/09-19:45 . 0268  Marco Morcos <puaaabdyi.ml@delegate.org> [68]
___ I am guessing that it has something to do with TIMEOUT parameters. But I have not tried to fix it. It should work if you restart the delegated on that same port 4000 with the same command you used t
  02/10-01:42 . 0269  "Erekose Ermizhad" <pbuaqbdyi.ml@delegate.org> [25]
___ Hi, I am running delegate 5.8.8 On Linux 2.0.36 (i586) with 16 MB RAM. I plan to use Delegate to act as a proxy server (http and ftp mainly ... maybe pop and smtp later on) for my internal users [th
Disable error-message ?
  02/10-02:26 . 0270  Holger Krull <pbyaqbdyi.ml@delegate.org> [9]
___ Hello all, is there a way to disable the error Message everyone gets if the access to a delegate http-server is denied? A message "403 access denied" would be enough, but everyone receives a large m
  admin search upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
Generated:07/24 06:19:31 (1 sec) Expires:07/24 12:19:30 @_@V