In message <_A3496@delegate-en.ML_> on 09/16/06(00:04:18)
you "Bruce Ryan" <pvagqbdyi-mxhgu45zz33w.ml@delegate.org> wrote:
 |I have a Windows 2003 server with 5 ip addresses. i would like to set up an 
 |HTTP proxy on each ip address. I noticed the command line options to listen 
 |on all ports, but how do I configure delegate to route HTTP traffic on each 
 |individual ip or will it do so automatically?
 |
 |For example
 |
 |HTTP traffic (client uses 10.0.0.1 as proxy) ---> delegate proxy  ---> web server (sees request from 10.0.0.1)
 |HTTP traffic (uses 10.0.0.2) ---> delegate proxy---> web server (sees request as coming from 10.0.0.2)
 |HTTP traffic (uses 10.0.0.3) ---> delegate proxy server  ---> web server (sees request from 10.0.0.3)
 |HTTP traffic (uses 10.0.0.4) ---> delegate proxy server  ---> web server (sees request from 10.0.0.4)
 |HTTP traffic (uses 10.0.0.5) ---> delegate proxy server  ---> web server (sees request from 10.0.0.5)
 |
 |Proxy server has IP address of 10.0.0.1-10.0.0.5
 |My web clients will be used to configure the 5 different delegate proxy 
 |server ip addresses.

If your "proxy server" means "reverse proxy server" then it can be
configured as follows:

  SERVER=http
  MOUNT="/* http://server1/* via=10.0.0.1"
  MOUNT="/* http://server2/* via=10.0.0.2"
  ...

Cheers,
Yutaka
--
  9 9   Yutaka Sato <pfqcabdyi-mxhgu45zz33w.ml@delegate.org> http://delegate.org/y.sato/
 ( ~ )  National Institute of Advanced Industrial Science and Technology
_<   >_ 1-1-4 Umezono, Tsukuba, Ibaraki, 305-8568 Japan
Do the more with the less -- B. Fuller