Sorry I ran that with port 999 by mistake, rather than 9999. But when I did
the step 2, the delegate cli as client is still not working:
*** ERROR: NO ACTIVE PORT
and no any log for it. But I use the browser instead, it's working properly.
Thanks a lot for your support.
On Fri, Sep 25, 2009 at 6:21 PM, Yutaka Sato <firstname.lastname@example.org> wrote:
> In message <_A4587@delegate-en.ML_>
> on 09/25/09(16:07:07)
> you David Wang <email@example.com> wrote:
> |Any update is much appreciated.
> You are recommended to be careful and sure what you did before asking.
> |On that reply, I mentioned I did the steps as you said, but the port 9999
> |not up at the first step, and the log is:
> | /bin/delegated -P999 -fv SERVER=https STLS=fcl TLSCONF=-vd
> |09/21 15:13:09.90  0+0: <DeleGate/9.9.3>  -P999 READY^M
> |I checked the port 9999 is not up, so the step 2 is failed with NO ACTIVE
> |PORT. what's wrong with me?
> I hope you know what "-P999" means...
> 9 9 Yutaka Sato <firstname.lastname@example.org> http://delegate.org/y.sato/
> ( ~ ) National Institute of Advanced Industrial Science and Technology
> _< >_ 1-1-4 Umezono, Tsukuba, Ibaraki, 305-8568 Japan
> Do the more with the less -- B. Fuller