Articles delegate-en/4901-5000 of [1-5169] on the server localhost:119
  upper oldest olders older1 this newer1 newers latest
search
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
range 4901 - 5000   digest:
Does Delegate support user-based access lists, with those users authenticated by a RADIUS server?
  09/11-18:27 . 4901  feedback@delegate.org (Yutaka Sato) [55]
  Maybe the safest configuration in your usage is restricting the target servers available for "consultants" who are identified as A) any users making accesses from "consultants' hosts" or B) users au
SIP proxy possibilities and MSN failure
  09/13-23:07 . 4902  "ZaMotH" <peyjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [854]
  Hello all ... First, i'd like to know if Delegat is able to handle a sort of SIP proxy. Usually I use SSH to tunnel my datas, but SSH seems no to handle UDP request. This is what I would like to set
UDP over TCP (Re: SIP proxy possibilities and MSN failure)
  09/14-13:50 . 4903  feedback@delegate.org (Yutaka Sato) [31]
  DeleGate does not support SIP (yet). Thre are several ways to convey UDP over TCP using a pair of DeleGate. The simplest one is using a pair of DeleGates for UDPrelay. hostA$ delegated -P2000 SERVER
Does Delegate support user-based access lists, with those users authenticated by a RADIUS server?
  09/15-07:58 . 4904  Vietnhi Phuvan <pcijqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [91]
  I am trying this syntax: delegated -P1080 SERVER=socks AUTHORIZER=-pam:http,ftp:192.168.255.0/24:* REMITTABLE="tcprelay/80" REMITTABLE="tcprelay/22" HOSTLIST="ConsServ:/10.80.80.100" HOSTLIST="ConsC
  09/15-11:27 . 4905  feedback@delegate.org (Yutaka Sato) [37]
  A user of a command shell is expected to know what "!" means when it used in a command line, and how to escape the interpretation of "!" by a shell (using "\"). Just see "man bash" and search the wo
HTTP proxy for Miranda without chunked encoding (Re: SIP proxy possibilities and MSN failure)
  09/15-12:04 . 4906  feedback@delegate.org (Yutaka Sato) [41]
  It seems that, at least in older versions, "Miranda" does not support the "chunked" encoding which is mandatory for the HTTP/1.1 clients. Here is a workaround by DeleGate to cope with such case: HTT
  09/16-03:28 . 4907  "ZaMotH" <peyjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [61]
  Thanks a lot for all those informations. I'll try to dig it at work tommorow. Thomas --- Original Message --- From: "Yutaka Sato" <feedback@delegate.org> To: <feedback@delegate.org> Cc: <peyjqbdyi-r
Does Delegate support user-based access lists, with those users authenticated by a RADIUS server?
  09/16-07:55 . 4908  Vietnhi Phuvan <pcijqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [71]
  I am trying this command (I am still in testing mode, that's why I am not scripting): delegated -P1080 SERVER=socks AUTHORIZER=-pam OWNER="root" REMITTABLE="tcprelay/80" REMITTABLE="tcprelay/22" HOS
  09/16-10:44 . 4909  feedback@delegate.org (Yutaka Sato) [30]
  This must be one of followings: REMITTABLE="tcprelay/80" REMITTABLE="+,tcprelay/22" REMITTABLE="tcprelay/80,tcprelay/22" REMITTABLE="tcprelay/{80,22}" A strange "/" in the second field of HOSTLIST d
HTTP proxy for Miranda without chunked encoding (Re: SIP proxy possibilities and MSN failure)
  09/16-16:52 . 4910  "ZaMotH" <peyjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [72]
  Hello I tried those two : dg9_9_7.exe -P8889 SERVER=http RES_WAIT=0 ADMIN=AZER@AZER..FR PERMIT=*:*:* HTTPCONF=bugs:no-chunked -v > Does not work dg9_9_7.exe -P8889 SERVER=http RES_WAIT=0 ADMIN=AZER@
Fw: HTTP proxy for Miranda without chunked encoding (Re: SIP proxy possibilities and MSN failure)
  09/16-21:02 . 4911  "ZaMotH" <peyjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [87]
  I got a mail delivery failure, so I send this mail once more. Thomas --- Original Message --- From: "ZaMotH" <peyjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> To: <feedback@delegate.org> Sent: Thursday, S
UDP over TCP (Re: SIP proxy possibilities and MSN failure)
  09/23-21:00 . 4913  "ZaMotH" <peyjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [74]
  I did try what you told me to, but it does not work. The UDP relay, does not transform packets to TCP one (wireshark is only showing udp packet sent) So I tried something else : On the actual comput
  09/23-21:14 . 4914  "ZaMotH" <peyjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [103]
  Ok I did make it work. It was not working because, on my Qteclient, I put 127.0.0.1 as server ... and SIP protocol seems to analyze the requested server. So I told Qteclient to use freephonie.net as
Does Delegate support user-based access lists, with those users authenticated by a RADIUS server?
  09/24-07:20 . 4915  Vietnhi Phuvan <pcijqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [107]
  I. I am attempting to make user groups work: delegated -P1080 SERVER=socks AUTHORIZER=-pam/delegated OWNER="root" REMITTABLE="tcprelay/{80,443,22}" HOSTLIST="ConsServ1:10.10.80.100" HOSTLIST="ConsSe
  09/24-12:34 . 4916  feedback@delegate.org (Yutaka Sato) [24]
  - As long as I knonw, there is no parameter with name "USERLIST". - "ConServ1" in the above PERMIT is not defined in any HOSTLIST. - "ConsServ1", "ConsServ2" and "ConsServ3" are defined but not used
UDP over TCP (Re: SIP proxy possibilities and MSN failure)
  09/24-15:13 . 4917  feedback@delegate.org (Yutaka Sato) [32]
  I don't believe that you could make it work as follows: At least it should have been like this: client-side: delegated SERVER=sockmux://remote-host:5678 PORT=1234/udp remote-host: delegated SERVER=s
Does Delegate support user-based access lists, with those users authenticated by a RADIUS server?
  09/27-11:45 . 4918  Vietnhi Phuvan <pcijqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [47]
  Sorry for the obvious spelling mistake with ConsServ1, but I have been putting the syntax through its paces by testing (successfully) giving different users access to different hosts on the local su
conditional mount on arbitrary protocol
  09/29-01:48 . 4919  "Jehan-Guillaume (ioguix) de Rorthais" <pg4jqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [52]
  Hello Yutaka, I played today with delegate trying to figure if I can use it to route some PostgreSQL clients based on their database connection. meaning: client want to connect to database "db1" ->
Does Delegate support user-based access lists, with those users authenticated by a RADIUS server?
  09/30-07:45 . 4920  Vietnhi Phuvan <pcijqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [59]
  I created a user group using HOSTLIST (syntax below) and tried to make it work, with zero success: delegated -P1080 SERVER=socks AUTHORIZER=-pam/delegated OWNER="root" REMITTABLE="tcprelay/{80,443,2
DYCONF for dynamic/conditional configuration (Re: conditional mount on arbitrary protocol)
  10/09-23:09 . 4921  feedback@delegate.org (Yutaka Sato) [93]
  Hi, Routing based on the content in an application layer could be realized several ways with the existing DeleGate as follows: SERVER=http + FCL(to generate CONNECT method) SERVER=socks + FCL(to gen
  10/18-22:22 . 4922  "Jehan-Guillaume (ioguix) de Rorthais" <pg4jqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [166]
  Le 09/10/2010 16:09, Yutaka Sato a crit : Hello, Well, as I need to proxy pgsql connection only, if I understand it correctly, the first ones (http and socks) couldn't accomplish this task. The last
DeleGate as an Application Level VPN Router
  10/22-04:30 . 4923  billing support <phmjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [73]
  Hell Yutaka-san, I am trying to use DeleGate as an Application Level VPN Router<http://www.delegate.org/delegate/HowToDG.html#alvpn>, and I follow the instruction exactly as below: hostA% delegated
FTP to SFTP gateway: multiple destinations
  10/24-10:51 . 4924  Filipe Brandenburger <phqjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [71]
  Hello, First of all, let me say that DeleGate is an awesome software (even though it's very complex!), I'm finding lots of uses for it, I'm really glad I found it. I have to upload files to SFTP ser
Making site fully available under alternative domain
  10/25-22:41 . 4925  Tom Smets <phujqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [65]
  Hi, I would like to offer a proxy service for a dedicated site, to make this site fully accessible via different domains without the need of modifying the core application, nor changing the browser
Delegate FTP/SFTP gateway
  11/02-15:00 . 4927  Vijay Pandit <pyejabdyi-rn3efjjlrqlr.ml@ml.delegate.org> [30]
  Hi Yutaka, I had a question about using DeleGate as a FTP/SFTP proxy. After the FTP client closes a session with the proxy, the session between the proxy and the SFTP server remains up for some time
FTP/SFTP Gateway - connection refused
  11/06-07:39 . 4928  Vijay Pandit <pyejabdyi-rn3efjjlrqlr.ml@ml.delegate.org> [322]
  Hi Yutaka, I am using Delegate as a FTP-SFTP proxy using delegate9.9.7 with the "too many open files" patch. I find that in a test when the client just logs into the server and logs back out, the se
  11/07-14:42 . 4929  feedback@delegate.org (Yutaka Sato) [19]
  Hi, I'm not sure but there were several fixes for SFTP after 9.9.7 so it might has been fixed somewhere in 9.9.8-prexx. Cheers, Yutaka 9 9 Yutaka Sato, CSDP,ITIL-F <y.sato@delegate.org> http://deleg
Host name issues.
  11/08-03:32 . 4930  ThatDeadDude <piijqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [102]
  Greetings, I hope I am not troubling you with a trivial problem, but I couldn't work out a solution from studying the manual. I'm using a DeleGate basically as a simple bridge for a variety of proto
FTP/SFTP transfer timeouts - Delegate 9.9.7
  11/10-09:10 . 4931  "Trigge, Graham" <ppajabdyi-rn3efjjlrqlr.ml@ml.delegate.org> [285]
  Good morning, I have an issue at the moment where a client is using Delegate 9.9.7 as an FTP/SFTP gateway. They have been transferring data fine using this gateway on version 9.7.7 without any issue
FTP/SFTP Gateway - connection refused
  11/10-15:41 . 4932  Vijay Pandit <pyejabdyi-rn3efjjlrqlr.ml@ml.delegate.org> [114]
  Hi Yutaka, I updated to 9.9.8-pre18, however the timeouts still occur. It may be something to do with the connection cache 11/09 09:29:45.30 [7056] 75+0/3: server_open(serverCC,127.0.0.1:0/50697) BO
  11/11-17:57 . 4933  feedback@delegate.org (Yutaka Sato) [107]
  Hi, I see. Thank you. With the enclosed patch, a broken cached session will be abandoned and a new session will be retried. Also you can shorten the timeout of session caching as follows: TIMEOUT=cc
FTP/SFTP transfer timeouts - Delegate 9.9.7
  11/11-23:07 . 4934  feedback@delegate.org (Yutaka Sato) [81]
  Hi, The response with the code 226 is necessary to inform of a client that the data transfer completed and the client can continue the next command. The special 226 response with "(upload in progres
FTP to SFTP gateway: multiple destinations
  11/12-00:04 . 4935  feedback@delegate.org (Yutaka Sato) [34]
  Hi, Selecting a destination server by the authenticated user name can be configured as follows: AUTHORIZER="-list{myuser,jsmith,upload}" MOUNT="/* sftp://xxx.example.com/* auth=myuser@*" MOUNT="/* s
HTTPS Virus Scan with Delegate
  11/17-22:45 . 4936  "Gilgan Jan" <pjajqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [245]
  Dear Sir or madam, i am currently trying to install delegate with havp as a HTTPS-Virus Scanner. The goal is to "unpack" the SSL-Encrypted traffic, scan it for viruses / malware and then reencrypt i
FTP/SFTP Gateway - connection refused
  11/24-21:01 . 4937  Vijay Pandit <pyejabdyi-rn3efjjlrqlr.ml@ml.delegate.org> [708]
  Hi Yutaka, I rebuilt delegate using the enclosed patch and tested, but there is no change. When the timeouts occur, the sftp process does not start when the ftp client issues a CWD. I have attached
Delegate as HTTPS-Scanning proxy
  11/29-20:26 . 4938  "Gilgan Jan" <pjajqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [284]
  Dear Yutaka, I found DeleGate when i was googling around. Recently I am working on a HTTPS Scanning proxy using DeleGate. This works great until now but I have found some bugs. Google.com e.g. appea
Use delegate as SSH proxy
  11/30-17:46 . 4939  pbyjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org [164]
  Hi Yutaka, Would like to ask you questions again. I saw this page "http://www.delegate.org/delegate/Manual.htm?SSH_via_Telnet" that can use delegate as proxy to SSH to other machines, but I hit a pr
HTTPS Virus Scan with Delegate
  12/01-15:12 . 4940  feedback@delegate.org (Yutaka Sato) [47]
  Hi, You can use DeleGate (which is working as an explicit HTTP proxy and SSLtunnel for clients) to do peeping/caching/filtering/... the content of HTTPS/SSL messages as follows: % delegated -P8080 S
Use delegate as SSH proxy
  12/08-08:34 . 4941  feedback@delegate.org (Yutaka Sato) [33]
  Firstly, you should setup your SSH client side configuration to logint the SSH server from the host. For example, you should be able to login with a SSH client to the server without DeleGate as "ssh
FTP/SFTP Gateway - connection refused
  12/11-08:21 . 4942  feedback@delegate.org (Yutaka Sato) [33]
  Hi, It might be possible that the detection of disconnection of the socketpair is failing, depending on the implementation of the socket interface by your OS. On what OS are you doing it? And detail
  12/14-14:14 . 4943  Vijay Pandit <pyejabdyi-rn3efjjlrqlr.ml@ml.delegate.org> [1053]
  Hi Yutaka, The OS being used is Solaris 10 on HP hardware. I have attached the log with additional -dG option. The log also contains lines such as the below: 12/11 09:42:11.01 [4695] 26+0: MAXIMA=de
  12/16-13:18 . 4944  Vijay Pandit <pyejabdyi-rn3efjjlrqlr.ml@ml.delegate.org> [166]
  Hi Yutaka, Increasing the memory on the server solved the timeout issue. It appears that due to the low memory, the SFTP process created during the first FTP/SFTP session was getting terminated afte
SFTP proxy question
  12/22-09:37 . 4946  Alexander Box <pkijqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [36]
  Please excuse my simplistic terminology: I have a client, C, that needs to access a remote sftp server, R. I am trying to setup delegate on a local server, L, so that C can ftp (not sftp) to L, supp
Control only 1 device from accessing the IMAP on the internet
  12/22-10:34 . 4947  Png Patrick <pvyjabdyi-rn3efjjlrqlr.ml@ml.delegate.org> [27]
  Yutaka, Currently, my user are accessing their mailbox via imap on their mobile devices on the internet. Their are control via the AUTHORIZER=-list{user1,user2,user3}. I like to control only 1 mobil
  12/27-03:29 . 4948  feedback@delegate.org (Yutaka Sato) [19]
  Sorry but I can't understand what "control only 1 mobile device" means. Does it mean permitting acesss from a device based on its IP address or MAC address or so? Cheers, Yutaka 9 9 Yutaka Sato (CSD
SFTP proxy question
  12/27-04:02 . 4949  feedback@delegate.org (Yutaka Sato) [46]
  Sorry but I can't understand what "R is inaccessible from L" means while you are specifying the server "R" to be accessed from your DeleGate on "L". The "servon" option is not applicable to sftp/FTP
NNTP usage statistics
  01/04-07:34 . 4950  Mehdi <pkyjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [26]
  Hi, I use delegated with NNTP / ssl and I would like to perform some statistics per user (eg nb article, size ...) I look into the PROTOLOG file but I didn't find information regarding the size of a
SMTP relays with special header handling
  01/19-02:26 . 4951  "Matthias Waldorf \(Zoom\)" <pgmhqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [29]
  Dear Yutaka, sorry if this a common question, but I could not find an answer yet. I need to do the following mail processing: Gateway 1 - filter incoming mails by recipients using wildcards (e. g. x
  01/21-21:14 . 4952  "Matthias Waldorf \(Zoom\)" <pgmhqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [27]
  Dear Yutaka, Gateway 1 is now almost completed using SMTPGATE. However, I could not setup a domain specific processing. Both addresses name@domain1.. and name@domain2.. use the same SMTPGATE configu
Support intermediate CA certificate or not?
  01/28-11:57 . 4953  David Wang <pomhqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [78]
  Dear Yutaka, We are using ~DGROOT/etc/certs/sa.x.x.x.x.pem and its key for ssl certificate, when we renewed the certificate, now the new one requires the installation of an intermediate CA certifica
question about ftp conf
  02/03-17:01 . 4954  P Andrieux <plijqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [41]
  Hello dear DeleGate, Is there any way to block PUT or GET commands with FTP proxy ? Thanks for this marvellous tool, Regards, Philippe (FRANCE)
SMTP relays with special header handling
  02/05-19:45 . 4955  Nick Parkes <plmjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [42]
  Interesting. I'm looking to do a similar thing. I'm looking to add a disposition-notification or read-receipt field, and/or specify/change the ESMTP DSN option. This may help.. http://www.delegate.o
Delegate LDAP proxy to active directory
  02/11-00:48 . 4956  plqjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org [21]
  Hello, is it possible to use Delegate as proxy to an Active Directory so that Delegate replaces anonymous binds to search the AD with some credentials? My problem is that some servers need to verify
FTP over SSL Explicit
  02/15-00:01 . 4957  plujqbdyi-rn3efjjlrqlr.ml@ml.delegate.org [180]
  Hello, I am trying for a project a connect to an explicid SSL server. This server is maintained by the goverment in the netherlands. Host: ftpsconfpub.belastingdienst.nl Port: 6374 I tryed with late
  02/19-23:08 . 4959  feedback@delegate.org (Yutaka Sato) [224]
  Hi, This message seems to show that the server does not support the negotiation of the version of the SSL protocol to be used. I tried several combinations to avoid the error message and found the f
SMTP relays with special header handling
  02/19-23:31 . 4960  feedback@delegate.org (Yutaka Sato) [97]
  Hi, You can select the gateway directory in SMTPGATE using MOUNT as follows: MOUNT="*%S@domain1.com smtp://%S@domain1.com gateway=@domain1.com" MOUNT="*%S@domain2.com smtp://%S@domain2.com gateway=@
  02/19-23:39 . 4961  feedback@delegate.org (Yutaka Sato) [19]
  Sorry, it should be as follows (with "*" in the right hand too): MOUNT="*%S@domain1.com smtp://*%S@domain1.com gateway=@domain1.com" MOUNT="*%S@domain2.com smtp://*%S@domain2.com gateway=@domain2.co
Support intermediate CA certificate or not?
  02/20-00:04 . 4962  feedback@delegate.org (Yutaka Sato) [21]
  Hi, Just catenate the certificate of the intermediate CA to the certificate file of the target server. Cheers, Yutaka 9 9 Yutaka Sato (CSDP,ITIL-F,OCUP-A,Security+) http://delegate.org/y.sato/ ( ~ )
question about ftp conf
  02/20-00:07 . 4963  feedback@delegate.org (Yutaka Sato) [25]
  With the following option, DeleGate will reject any uploading to FTP servers: REMITTABLE=ftp//readonly Cheers, Yutaka 9 9 Yutaka Sato (CSDP,ITIL-F,OCUP-A,Security+) http://delegate.org/y.sato/ ( ~ )
Support intermediate CA certificate or not?
  02/21-07:08 . 4964  David Wang <pomhqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [50]
  Hi Yutaka, Thanks for your response. I tried it but not working, our version is 9.9.6-pre3, and using multiple certificates bundled with different host IP addresses via the pair of ~DGROOT/etc/certs
NTLM proxy traversing
  03/22-18:45 . 4966  Anne Kootstra <pmyjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [57]
  Presently I'm faced with a proxy that uses NTLM authentication and an application that does not support it. Looking at the options of Delegate I'm wondering if it can be used in this scenario. The s
Delegateによる鍵認証付SSH接続について
  03/28-19:18 . 4967  Hisashi Ohno <pm4jqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [40]
  産業技術総合研究所 佐藤様 お世話になります、富士通)大野と申します. 現在、Delegateにてssh、sftpの接続を中継しており、 Client-Delegate間の接続はtelnet/ftp使用し、下記のような環境で 動作しております. [
NTLM proxy traversing
  05/21-18:52 . 4968  feedback@delegate.org (Yutaka Sato) [35]
  Hi, Long ago, as long as remember know, I implemented NTLM and Negotiate auth. tentatively. -Enh ... DeleGate proxies NTHT between client and server AUTHORIZER=-ntht ... DeleGate does authentication
client script with delegate
  05/23-12:10 . 4969  =?big5?B?sWmw6qXN?= <pnejqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [58]
  Hi, We use delegate 7.3.1 as a telnet proxy server. Would you mind telling me any tool like plink.exe interacting with telnet server also works with delegate server for automating administration job
Stab server for "article not found"
  05/23-18:49 . 4970  Florent Bautista <pyyiqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [14]
  Hi, I would like to know if Delegate is able to use a defined stab server (using MOUNT or other..) to use when there's an error (like "Article not Found" for NNTP) on the first one defined. The goal
Windows delegate with SSO
  05/26-05:42 . 4971  Aleksandar Lazic <pnmjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [267]
  Dear list member, I try to ssltunnel thru a ntlmproxy. As long as I was able to use username and password everything works, now the windows auth is over a smartcard. IE7 and Firefox3/4 are able to a
  05/26-06:12 . 4972  feedback@delegate.org (Yutaka Sato) [312]
  Hi, Hmm... You are using so much options and I dont't understand whether or not all of them are effective... The log shows that the SSLtunnel server is asking a proxy authentication. You can send it
  05/26-06:21 . 4973  Aleksandar Lazic <pnmjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [49]
  thanks, what is the minium to see a debug output? The problem is that I don't know the password. The password comes from winsdows environment. The process look like this, I think. 1.) push smartcard
  05/26-06:42 . 4974  feedback@delegate.org (Yutaka Sato) [31]
  Hi, Oh, I see. I understand what you need but, ... I'm sorry. Currently I don't have time and the environment to find and test the solution for the problem... Cheers, Yutaka 9 9 Yutaka Sato (CSDP,IT
  05/26-07:22 . 4975  Aleksandar Lazic <pnmjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [32]
  Hi, No probs, thanks for your time. I like delegate very much thank you for your good work ;-) BR Aleks
windows warnings
  05/26-19:09 . 4976  Aleksandar Lazic <pnmjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [104]
  Dear Yutaka, I get a lot of this messages in my console. BR Aleks ---_< >_ connected (0.921)((with SSL))(0.921) ::: HTTP port: 4711 => 127.0.0.1:4711 --Y3 12:06:26.10 PortMap 4712/127.0.0.1/tcprelay
VStr overflow in wordscanX for DeleGate 9.9.7
  06/09-03:29 . 4977  Jianfang Guo <poejqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [14]
  I want to tcp relay more than 1k ports, and the load is not a problem, the data flow per port is very light, but when I run it with the command "dg9_9_7.exe -P9174,9175,...", Delegate throw the foll
  06/09-07:44 . 4978  feedback@delegate.org (Yutaka Sato) [29]
  Hmm... the warning is just because too long string in an argument that is read from your configuration file. You may ignore the warning, or you can shorten the argument by grouping those ports as -P
  06/09-12:35 . 4979  Jianfang Guo <poejqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [423]
  Hi, Yutaka, thanks very much for your quick reply. With port range the problem "VStr overflow in wordscanX" has gone away, however, new error with port binding jumps out, in my case, the most number
Problem with large files FTPS (IMPLICIT) with delegated TO SFTP SERVER
  06/10-00:54 . 4980  =?iso-8859-1?Q?Hern=E1ndez_Bueno=2C_Jose_Antonio?= <poqjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [226]
  Hello, I have running this delegated: delegated -P990 SERVER=ftps RES_WAIT=0 MOUNT="/* sftp://<SFTP_SERVER>/* waitput=3600,data max=1g" TLS=fcl PERMIT="*:*:*" OWNER="*:*" I have a problem with files
CONFIGURE dataports FTPS (IMPLICIT) with delegated TO SFTP SERVER
  06/10-01:56 . 4981  =?iso-8859-1?Q?Hern=E1ndez_Bueno=2C_Jose_Antonio?= <poqjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [224]
  Hello, I have running this delegated: delegated -P990 SERVER=ftps RES_WAIT=0 MOUNT="/* sftp://<SFTP_SERVER>/* waitput=3600,data max=1g" TLS=fcl PERMIT="*:*:*" OWNER="*:*" I wanted to know if it is p
authorizer
  06/15-21:17 . 4982  Isidoros Moulas <poyjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [50]
  hi, i'm using the following command AUTHORIZER=-cmd{/usr/local/delegate/deko_login.php %U}{MYPASS=%P} my php is working and also delegate displays the results e.g. 530 FAILURE but i cant see a login
Delegated udp over SSH?
  06/15-23:59 . 4983  Anders Larsson <po4jqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [48]
  Hello. Im trying to evaluate delegate for a customer that want's to use it for transporting SNMP UDP over SSH tunnels. If that works, they want to use it for other protocols so there might be 1 or s
Delegate SSH to Telnet
  06/21-22:53 . 4984  "Glenn E. Falkowski" <ppajqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [122]
  I would like to know if I can use your product to be a SSH to telnet gateway / reverse proxy I would like a user to SSH to the server with your code installed, then your server will open a telnet se
POP3 SSL DeleGate Proxy Setup
  07/09-02:16 . 4985  Alex Fort <ppejqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [41]
  Hi, I'm attempting to set up a POP3 proxy to work with gmail's POP3 server, to enable applications without SSL support to utilize gmail's POP3 server. This works fine on every machine I want to set
  07/11-12:07 . 4986  佐藤 豊 <y.sato@aist.go.jp> [54]
  Hi, At least the character before the "P110" must be "-" (not "" ). Yutaka
Delegate as gateway for HTTP to HTTPS with Client Certificate
  07/12-20:33 . 4987  Kadanik Jiri <ppmjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [313]
  Hi, I am trying to set up Delegate as gateway for HTTP clients to be able to access HTTPS server with content accessible only with client certificate. I have https server with client certs working (
  07/14-20:32 . 4988  feedback@delegate.org (Yutaka Sato) [15]
  The message seems saying the argument should be as "-pass pass:password" ... Cheers, Yutaka 9 9 Yutaka Sato (CSDP,ITIL-F,OCUP-A,Security+,ISTQB-F) ( ~ ) National Institute of Advanced Industrial Sci
Reverse Proxy for Webmail
  07/17-09:10 . 4989  <ppujqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [135]
  Hi, My setup is in question consists of three servers. The internet facing firewall, a reverse proxy server in the DMZ, and a web server in the LAN. The information of my setup is like this: URL of
installation inquiry
  07/28-01:17 . 4990  Muaaz Hussain <ppyjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [34]
  Hi I am trying to install delegate and use it in fedora 11 but I don't know how to do the third step in the installation guidelines which is (Setting up the run-time files of DeleGate (OPTIONAL)) ca
Conditional FSV filter
  09/20-12:11 . 4991  "=?GB2312?B?zuLQobHz?="<pp4jqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [26]
  feedback低挫 伶弌遠{#CCX:UTF-8:NOMAP:LocalToUTF8:232c#}1213849442@qq.com 2011-9-10
Delegate 9.8.8 pre 18 - FTP/SFTP proxy and maximum password length
  09/21-10:24 . 4992  "Trigge, Graham" <ppajabdyi-rn3efjjlrqlr.ml@ml.delegate.org> [249]
  Good morning Yutaka. I am running the latest version of Delegate as an FTP/SFTP proxy server and has been working well for several years. I would like to find out if there are any password length li
Delegate as an HTTPS cache proxy
  09/22-19:46 . 4993  "VICENTE JR. V. LAMBUS" <pqejqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [39]
  Hello, I hope this letter finds you well. I would like to ask if DELEGATE can be a transparent proxy for HTTPS with cache? Thanks Vicente V. Lambus, Jr. Systems Administrator ITS Department Xavier S
  09/27-15:53 . 4994  feedback@delegate.org (Yutaka Sato) [15]
  If HTTPS can be proxied transparently, it must not be "secure"... Cheers, Yutaka 9 9 Yutaka Sato (CSDP,ITIL-F,OCUP-A,Security+,ISTQB-F) ( ~ ) National Institute of Advanced Industrial Science and Te
SSL encryption
  11/05-11:03 . 4995  "G. W. Ulrich Sieveking EDV-Beratung" <pqmjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [21]
  Dear Mr. Sato, is there any way to see which encryption and hash algorithms were used to establish a TLS session in the logs generated by DeleGate? Even with TLSCONF="-vd" I see only numeric status
questions implemnting delegate with APNS
  11/06-22:58 . 4996  Admin Nifgashim <pqqjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [110]
  Hello, I am starting the service with the following command: dg8_11_2.exe -P8000 SERVER=http FSV=sslway DGROOT=c:/delegate ADMIN=admin@nifgashim.. The purpose of the usage of delegate is to be able
SSL encryption
  11/10-17:35 . 4997  feedback@delegate.org (Yutaka Sato) [96]
  Hi, There has been no way for logging the cipher information of the current SSL session in DeleGate. I made a modification to enable the logging with TLSCONF=-vd option to show the description after
Delegate 9.8.8 pre 18 - FTP/SFTP proxy and maximum password length
  11/10-18:49 . 4998  feedback@delegate.org (Yutaka Sato) [91]
  Hi, I don't think there is a limitation by such a short length. You might find what is wrong in your case by using "-dG" option of DeleGate to get detailed logging of the conversation between DeleGa
ssh connect to delegate
  11/10-23:19 . 4999  "Aaron Wookey" <pq4jqbdyi-rn3efjjlrqlr.ml@ml.delegate.org> [222]
  Hi I am trying to secure the connections to our delegate proxy Currently we have a few ftp to ftps connections, im transferring these to ftps to delegate then ftps from there What is the correct syn
SSL encryption
  11/12-12:17 . 5000  pqmjqbdyi-rn3efjjlrqlr.ml@ml.delegate.org [61]
  Hi Yukata, this is exactly what I need. Thank you very much indeed. Best wishes, Ulrich ---Original Message--- From: feedback@delegate.org (Yutaka Sato) Date: Thu, 10 Nov 2011 17:35:00 To: <feedback
Empty-Articles = [4912][4926][4945][4958][4965]
  admin search upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
Generated:12/11 19:01:32 (4 sec) Expires:12/12 01:01:28 @_@V